Product details
PASSO 1: First, loosen the straps and remove the front plate. (Fig1a)
STEP 2: Open the lining and put the boot on. Make sure the calf and foot are comfortably fitted and close the lining. (Fig2a)
STEP 3: Place the front plate on the lining and make sure that the “Pump” is aligned with the opening. (Fig. 3a)
STEP 4: Tighten the ankle, foot and calf bands in sequence and make sure they are firm and comfortable. Then press Pump to inflate the air system until it provides support and the right amount of comfortable compression. If this is uncomfortable, turn the orange knob to the ”R” (right), ”L” (left) or ”+” (right and left) position and then press it to deflate or adjust the pressure of the liner on the right, left or both sides. (Fig. 4a)
STEP 5: To remove the boot, press the orange button until the air system empties, loosen the straps, remove the front plate and then pull the foot and calf forward and out.
STEP 2: Open the lining and put the boot on. Make sure the calf and foot are comfortably fitted and close the lining. (Fig2a)
STEP 3: Place the front plate on the lining and make sure that the “Pump” is aligned with the opening. (Fig. 3a)
STEP 4: Tighten the ankle, foot and calf bands in sequence and make sure they are firm and comfortable. Then press Pump to inflate the air system until it provides support and the right amount of comfortable compression. If this is uncomfortable, turn the orange knob to the ”R” (right), ”L” (left) or ”+” (right and left) position and then press it to deflate or adjust the pressure of the liner on the right, left or both sides. (Fig. 4a)
STEP 5: To remove the boot, press the orange button until the air system empties, loosen the straps, remove the front plate and then pull the foot and calf forward and out.
Structure: 100% polypropylene; Lining: polyurethane foam 50% + nylon 50%; Sole: 100% TPE (thermoplastic elastomer); Calf strap: 100% polypropylene; Drawstring: 100% nylon; Central/anterior pump: tpe 70% + abs (plastic) 20% + polyacetal 5% + steel 5%; Insole: 100% e.v.a.; Zippers: 50% nylon + 50% polyester.
3 (three) months after purchase, on presentation of the sales invoice at the place of purchase, excluding cases of improper use of the product.
Do not use without medical advice.
– Use a sock to avoid direct contact with the lining for greater comfort.
– Do not over-inflate the air system, as this can cause significant stimulation in patients with diabetes or neuropathy. If any visible skin changes or discomfort occur, reduce the pressure immediately.
– Contraindicated for people with altered sensitivity.
– Be careful when walking on slippery surfaces.
– At high altitudes, the air system can increase compression. Relieve the pressure.
– Before use, check that the boot is intact. Do not use if damaged.
– If you experience pain, swelling, irritation or discomfort while using this
product, stop using it immediately and consult your doctor.
– Use with caution for unstable fractures, osteoporosis, bone ankylosis.
Indefinite
Keep in a place protected from rain, humidity and direct light. Preferably store the product in its original packaging.
Lining: Wash in cold water with neutral soap; Do not bleach; Do not tumble dry; Do not dry clean; Do not wring out; Leave to dry in the shade. Please note: Do not submerge and wet the filling pump located at the top of the lining. Structure: Wipe with a cloth dampened with water; leave to dry in the shade or use a dry cloth.
150kg
Stella Lima San Martins
8.07.582-1
80758210090
CHINA
safe move pneumatic boot
OR1071
Contusions (soft tissue injuries); Dislocations; Stable fractures; Severe sprains and post-operative use.
Color:
Gray
Single
Product details
PASSO 1: First, loosen the straps and remove the front plate. (Fig1a)
STEP 2: Open the lining and put the boot on. Make sure the calf and foot are comfortably fitted and close the lining. (Fig2a)
STEP 3: Place the front plate on the lining and make sure that the “Pump” is aligned with the opening. (Fig. 3a)
STEP 4: Tighten the ankle, foot and calf bands in sequence and make sure they are firm and comfortable. Then press Pump to inflate the air system until it provides support and the right amount of comfortable compression. If this is uncomfortable, turn the orange knob to the ”R” (right), ”L” (left) or ”+” (right and left) position and then press it to deflate or adjust the pressure of the liner on the right, left or both sides. (Fig. 4a)
STEP 5: To remove the boot, press the orange button until the air system empties, loosen the straps, remove the front plate and then pull the foot and calf forward and out.
STEP 2: Open the lining and put the boot on. Make sure the calf and foot are comfortably fitted and close the lining. (Fig2a)
STEP 3: Place the front plate on the lining and make sure that the “Pump” is aligned with the opening. (Fig. 3a)
STEP 4: Tighten the ankle, foot and calf bands in sequence and make sure they are firm and comfortable. Then press Pump to inflate the air system until it provides support and the right amount of comfortable compression. If this is uncomfortable, turn the orange knob to the ”R” (right), ”L” (left) or ”+” (right and left) position and then press it to deflate or adjust the pressure of the liner on the right, left or both sides. (Fig. 4a)
STEP 5: To remove the boot, press the orange button until the air system empties, loosen the straps, remove the front plate and then pull the foot and calf forward and out.
Structure: 100% polypropylene; Lining: polyurethane foam 50% + nylon 50%; Sole: 100% TPE (thermoplastic elastomer); Calf strap: 100% polypropylene; Drawstring: 100% nylon; Central/anterior pump: tpe 70% + abs (plastic) 20% + polyacetal 5% + steel 5%; Insole: 100% e.v.a.; Zippers: 50% nylon + 50% polyester.
3 (three) months after purchase, on presentation of the sales invoice at the place of purchase, excluding cases of improper use of the product.
Do not use without medical advice.
– Use a sock to avoid direct contact with the lining for greater comfort.
– Do not over-inflate the air system, as this can cause significant stimulation in patients with diabetes or neuropathy. If any visible skin changes or discomfort occur, reduce the pressure immediately.
– Contraindicated for people with altered sensitivity.
– Be careful when walking on slippery surfaces.
– At high altitudes, the air system can increase compression. Relieve the pressure.
– Before use, check that the boot is intact. Do not use if damaged.
– If you experience pain, swelling, irritation or discomfort while using this
product, stop using it immediately and consult your doctor.
– Use with caution for unstable fractures, osteoporosis, bone ankylosis.
Indefinite
Keep in a place protected from rain, humidity and direct light. Preferably store the product in its original packaging.
Lining: Wash in cold water with neutral soap; Do not bleach; Do not tumble dry; Do not dry clean; Do not wring out; Leave to dry in the shade. Please note: Do not submerge and wet the filling pump located at the top of the lining. Structure: Wipe with a cloth dampened with water; leave to dry in the shade or use a dry cloth.
150kg
Stella Lima San Martins
8.07.582-1
80758210090
CHINA
Products related
ankle brace w/ zipper
Code OR46D
See More
adjustable ankle brace
Code OR46C
See More
ankle brace
Code OR46
See More
velpeau air flex splint
Code OR1000
See More
velpeau splint – standard
Code OR1050
See More
immobilizing sling for children – male
Code OR1003
See More
immobilizing sling for children – female
Code OR1003A
See More
velpeau upholstered immobilizing splint – for children
Code OR1003B
See More
velpeau upholstered immobilizing splint – black
Code OR1001A
See More
velpeau upholstered immobilizing splint – blue
Code OR1001
See More
simple denim splint
Code OR1002
See More
adjustable tennis elbow – recovery
Code RV07
See More